A variety of Decorative Moldings


A decorative creation can be defined as any continuous projection used to enhance the look of the wall. In ancient Portugal, they were first used to toss water away from the walls. The contours, measurements, and projections of moldings differ significantly.


One kind of molding – the frieze (or frieze board) — was first used on the Parthenon at the Acropolis. The frieze is considered a part of the Ancient greek architectural style.

The Parthenon was built for empress Athena. The frieze moldings used were designed to tell the story of your ex-triumph over Poseidon in growing to be the patron of the early city, which is now Athens.

The frieze panels can be a series of designed pediments that happen to be filled with the images of Athena’s birth and rise for you to power. Today, a frieze board is the flat -panel just below a crown creating or cornice. Often, shallow relief is applied to this kind of panel for added decor.

Today, frieze moldings are generally most familiar as part of an ornamental molding that follows neoclassical architecture or decorating fashion.

It would be best if you had a pretty high hall (minimum of 9 feet), and it’s a good idea to paint or maybe stain the frieze plus the crown molding with the same coloring. A frieze is an excellent approach to visually bring the ceiling along and make the room appear cozier.

Crown Molding

Crown creating is the most popular type of cornice molding. Crown molding is primarily a piece of pretty molding installed at the top of some wall, at an angle to the plus ceiling. However, I have viewed crown molding assemblies involving 5 or more pieces in much more elaborate settings.

Crown creating often has a profile that projects out on the hall and down the wall membrane, adding a rich visual appeal to a room. It is usually employed at the top of cabinets or integrated furniture.

Introducing this type of pretty molding to a relatively simple place provides a historic character that the room would not otherwise get. Crown molding is combined with other moldings to give details to fireplace mantels and shelves. (For precisely what it’s worth, this is probably the most prominent architectural feature).

Crown creating is a form of Cornice Creating. The term “cornice” describes creation installed along the top of any wall or above the screen. When this treatment is made from various pieces of molding, it is known as “build-up cornice. ” Another form of cornice molding may be Cove Molding.

Cove Creating

Cove molding is like crown molding, with the same application and function. The difference between the two is in the profile. Cove molding has a concave user profile (which bows inward), while crown molding has a convex (outward) profile.

While overhead is most at home in conventional settings, Cove moldings tend to be equally comfortable in national or contemporary settings. You don’t need to see multi-piece assemblies of cove moldings usually. You can occasionally see it “beaded” at the top and bottom for any little accent.

Entries, official living rooms, formal dining areas, and master bedrooms generally receive decorative moldings and ornate or traditional designs.

Kitchens and other more practical home areas might be you want to find the more straightforward design of typically the cove molding. Over the years, bays and crowns have become reduced, but most still bear typically the shapes and styles of the first Greek and Roman makers.

Chair Rail Molding

Some sort of chair rail is a pretty molding that divides some kind of wall horizontally, usually 32″ to 36″ on the floor. They protect them in areas where damage may well occur from people waking up out of chairs.

For this reason, the more rigid traditional chair rails should have a nosing in the facility, with curved and beveled surfaces that taper back in the wall above and below the nosing.

Today, lounge chair rails remain a common aspect of traditional interiors. They serve the decorating as a result of unifying the various architectural information on a room, such as a door and a window lean and fireplace surrounds.

Chair train can also be used as a cap intended for wainscoting or other solid wood paneling. This decorative creation adds a feeling of detail and charm while achieving continuity in a room by unifying the various decorative elements.

Screen Molding

Panel molding, generally called a picture frame creation, looks like an extensive empty framework and is often part of styles on walls of aged Colonial and Georgian, as well as Early American homes. The location of this molding should be over a chair rail height, regarding 10 to 12 ins down from the ceiling.

The dimensions of this type of decorative molding, calculated 1″ to 3″ wide, should be proportionate to the roof height of the room. Such as other moldings, panel creation adds charm and refined detail to a room.

Walls framing appeared in the Georgian period of American architecture whenever plaster began to replace wooden panels on the walls. Screen molding also is an excellent way to separate walls into large, visually pleasing units without the same expense of entire wall paneling.

Another application of this versatile molding is to cut openings made by wider cedar planks assembled as bed rails and styles. Often, the centers of these frames remain open. By applying panel moldings around the starting perimeter, you create the look of an image frame.

When this ornamental molding is painted within the same color as the encircling walls, you achieve a sculptural quality to a wall, including texture and shadows. If moldings are painted with contrasting colors, they can develop a striking three-dimensional appearance, providing depth and dimension. This kind of treatment is popular for staircases and entries.

Baseboard and Base Molding

Baseboard creating protects the bottom of the wall membrane from wear and grab while hiding openings and other irregularities where the wall fits the floor. Base moldings allow the floor line a higher page and can be as elaborate or simple as you like.

In contrast, it is relatively easy to install lounge chair rails on a level plane; baseboard (like a crown) might be tricky if your floors (or ceilings) are not level. Therefore, I recommend getting a professional handyman to install these moldings.

As one remedy to twisted floors, you can install “shoe molding” along the bottom front side edge to give the baseboard some finished look. Something else you can perform with baseboard (as effectively as with the toe give up of your kitchen cabinets) is usually incorporating accent lighting.

This may not be in keeping with the pure traditionalist, but it’s a clever way to have accent lights around the perimeter of a place. You couldn’t do this until. Eventually, they created the small DIRECTED rope lights of today.

Pieces of string lights come in different diets and colors and can be easily put behind the baseboard. Come up with a notch in the back area of the baseboard at the top, and run the rope signals into the gap.

This is more regularly used in commercial spaces, nevertheless has been added in posts and hallways – specifically in contemporary homes.

Flexible Moldings

If you have a curved wall membrane or arch, you can almost certainly have an excellent craftsman make a curved molding for about 3 x the cost of a straight molding. Or maybe, you can buy a flexible molding for approximately the same price as the direct one.

These allow you to mount moldings onto curved surface types or arches without the hold up and expense of having these people made from wood. The commodity profiles (there are hundreds) are identical to the rigorous versions, and they are compatible in terms of paint finish is concerned.

Charles Gueli invites you to find out about decorative molding, along with taking advantage of the resources where guidance, information, and assistance are always available – supporting homeowners to make better decisions.

Read also: Home Design For Your Living Room – Through Bari Furniture