What Are The Mistakes To Avoid While Using Power Strip?

0 23

Many homes, especially the older ones, have limited electrical outlets. This can be rather inconvenient when you need a direct power source for all of your appliances and electronics. So, what’s the best option? Most people would say, “Use a power strip!” Unfortunately, while using a power strip for several household gadgets is an innovative idea, it cannot be a safer option for everything. Below are some mistakes you should avoid while using power strips to ensure you’re using them safely and correctly in your home.

1. Not Matching the Amps of Power Strip with Transformer’s Output

You should always check whether your power strip matches your transformer’s amperage. So, a 30 amp power strip cannot be plugged into a 20-amp wall outlet. It is advised to use power strips that match the transformer’s amperage and are required by the appliances you are using for your safety. A higher-wattage power strip will not increase the wattage output of your transformer, so you should buy a power strip that matches its maximum output watts.

2. Power Strip without Surge Protector

Many people use the non-surge-protected power strips, which later proves dangerous due to electrical damage. If any appliance attached to it gets a short circuit or spark, there is a massive chance of creating fire problems in your house. It is always advisable to use the surge-protected power strip.

3. Placing Power Strip behind Furniture or Closet

Many people place the Power Strips behind their furniture, which is very dangerous. Due to some technical problems, if any appliance gets short circuit, there are big chances of damaging your appliances and furniture. Therefore, it is better to keep them open on all sides instead of holding them enclosed. This way, even if they get damaged due to electricity leakages, there will also be less damage on your desktop.

4. Avoid Plugging a Power Strip into Another Power Strip

If you want more outlets or your power strips won’t reach far enough, it’s tempting to connect several in a daisy chain, plugging one into the next. In a nutshell—don’t do it. It not only violates numerous OSHA regulations while being in a professional setting, but it can also cause one or more of the strips. Power strips provide a level of protection that will reset once power is removed. They prevent the current from being grounded, which could damage your equipment in the event of a power surge. By plugging one strip into another, you bypass several internal safety features. This can cause irreparable damage to your devices or at least render them much more likely to fail.

5. Not using Grounded Indoor Extension Cords with the power strip

30 amp power strip


Image Source

Many people use an indoor extension cord for outdoor purposes only. They are not meant for outdoor usage. Instead, they are light-duty cords that should be used indoors only. Using them outside may cause overheating or possible electric shock due to water exposure. Using Outdoor extension cords also reduces the amperage of each outlet on the power strip resulting in a slower charging speed of devices connected to it.

6. Using Wrong Extension Cords with Power Strip

30 amp power strip

Image Source

You should use extension cords of known brands to avoid any electrical shock. Cheap quality cheaper cords can catch fire due to overheating resulting in damage to the appliances and the house itself.

7. Never allow children to come near power strip

You should always keep your power strip out of the reach of children as it can be harmful to them as due to some reasons if they get any electrical shock, then it may lead to severe injuries or even severe accidents.

8. Never use Cheap Power Strips

One of the most cost-effective solutions on the market is the use of surge protectors or surge suppressors. While they may seem expensive, they can save hundreds of dollars in damages by protecting against electricity spikes that can destroy sensitive equipment such as computers. Many people buy cheap quality power strips, which usually fail soon after purchase, leading to further problems. They should always go for branded ones that can serve them efficiently without any harm. Safety comes first, even unknowingly; if someone makes a mistake, it can lead to irreparable damage. Thus, it’s better to prevent errors rather than neglect them later.

9. Replacing Power Strip without Checking Fuses Underneath

30 amp power strip

Image Source

If the fuse of your power strip gets tripped, then the only way to fix it is by replacing it with a new fuse. However, you should never try to replace or repair them without checking underneath as if you do so; there are chances of creating more problems even if you don’t see any at present.


Always use power strips correctly and responsibly. Then, you can be sure your devices are protected from electrical malfunctions while staying safe if it sounds like a daunting task to read through all of these tips at once, don’t fret. You should go back over them periodically as they’ll help you remember what not to do when using a power strip. It’s essential to avoid these mistakes at all costs to avoid accidents and ensure the safety of your appliances attached to the power strip.

Read Also: Top 5 Technological Advancement In Automobiles

Leave A Reply

Your email address will not be published.